Curve Face and Body + CBE Botanicals Conducting Gel

You get to bring the treatment room home when you have a Curve Face & Body. This device makes it possible to reduce the appearance of fat and cellulite on the arms, legs, tummy, and hips in the privacy of your home! Additionally, it gives a great skin tightening treatment on the lower face, neck, and décolleté (modes 1 or 3) or reduce fat on the lower face or neck using modes 2 or 4.

The Curve Face & Body is 4 modalities in one device. You'll get Radiofrequency at 500 KHz, Ultrasound at 670,000 waves per second, LED at 625nm, and biochemical vibration. Depending on degree of fat and cellulite accumulation, results can be experienced with consistent use (15-minutes 2-3 days a week) in 10 - 24 weeks for most. Some see results sooner. 

Download Instructions Here 

4 MODALITY TECHNOLOGY IN ONE DEVICE

LED Light 625 nanometer - The ENERGY in LED has long been known to support the healing process in skin. Red LED metabolizes undesirable toxins and metabolic deposits.

Biomechanical Vibration - (VIB) This is the mode that induces toning! The gentle vibrations stimulate muscles, improving the supply of nutrients and oxygen to the tissue for smooth healthy skin.

Two units recommended for saving time and when treating large sections of the body or both legs at once! 

For Body Contouring

Treats problematic areas for optimal body shaping by positively influencing skin and tissue. It is particularly suitable for flaccid, tired skin, or cellulite on breasts, buttocks, thighs, upper arms, stomach and hips. Continuous application results in long-term and lasting rejuvenation and tightening of the skin and connective tissue.

Prepare Skin:

1.  Clean the skin (Wash treatment area or shower if doing a body treatment).
2. If necessary, carry out deep cleansing/exfoliation with a product suitable for your skin type.

Instructions

After cleansing and after any serums have been applied and absorbed, apply CBE Botanicals Conducting Gel (does not come with MBK Serum) to the treatment area in a thin even layer.

Press the on/off button to turn on the Curve device. You will hear a signal. (If the signal cannot be heard, the battery is low.)

Select the appropriate treatment mode by pressing the on/off button again observing the panel for the applicable mode.

• Pressing once turns device on and activates LED and RF (No VIB and No Ultrasound)
  
• Pressing second time activates LED/Ultrasound (No RF and No VIB - Continuous level (no low, med, high)
  
• Pressing third time activates LED/RF/VIB (No Ultrasound)
  
• Pressing four times activates Ultrasound/VIB (No LED and No RF)
  

After choosing modality, user can choose level by pressing the second button (up/down indicator) with one click for low, two clicks for medium, and three clicks for high. clicking a fourth time returns to low.

Slowly move the device in circles (applying light pressure) on the treatment area. Repeat the movements 2-5 times on the treatment area.

Pressing and holding the POWER button for a few seconds (hear double beep) and releasing turns the device OFF.

NOTE: This device requires recharging after 45-60 minutes of use. If treating both legs, use 7-1/2 minutes on right leg, 7-1/2 minutes on left leg. Same for both arms. 

• Lower face/neck/décolleté: use lifting movements with light pressure modes 1 or 3
• Legs: work from the bottom up modes 2 or 4
• Breasts: avoid breast tissue, work on the breast muscle (upper chest) to tighten it modes 2 or 4
• Upper arms: work from the elbow to the armpit modes 2 or 4
• Stomach and hip: work in a clockwise, circular motion modes 2 or 4

DURATION OF TREATMENT:

Curve can be used UP TO 15- minute session entire area of treatment (auto/off after 15 minutes). A treatment can be carried out 2-3 times a week with a day of rest in between.

Can be used up to 5 minutes if you want to use daily. If you want to treat legs, use it for 7-1/2 minutes on right leg, then 7-1/2 minutes on the left leg. Recharging is necessary after 45-60 minutes of use.

For optimal treatment success, plan at least 10-24 full treatments. After completing a treatment cycle, monthly maintenance is recommended to sustain the results.

CLEANING:

We recommend gently cleaning the device immediately after use with an antibacterial wipe. Keeping the unit clean will extend the life of the device.

CHARGING GET A FULL CHARGE BEFORE FIRST USE. Allow 2.5 to 3 hours for full charge. Getting a good full charge BEFORE the first use, will ensure the battery holds a charge longer.

Do NOT use device while plugged into charger. This will destroy the electronics inside the device. This device does not come with an adaptor because many modern homes now have USB plugins.

If you do not want to plug into a USB port, you can use an AC adaptor and plug into a wall outlet. Do NOT use FAST-CHARGING cell phone adapter. Device will not hold charge.

If you want to purchase a portable power bank/charger you will need one that is rated for 5V and has 20,000 – 40,000 mAh for the charge to last longer. Less than 20,000 mAh just means you’ll have to charge the power bank more often. Larger than 40,000 mAh and you lose portability.

After you start using the device, it will beep when charge is low and will beep more often, as it gets closer to losing the charge completely.

Download Instructions Here 

DO YOU HAVE QUESTIONS? VISIT OUR FAQ PAGE FOUND HERE.

DISCLAIMER: No information on this website is intended to diagnose, treat, cure, or prevent any disease. If you have (or think you may have) a medical condition that could be adversely affected by any product or device sold here, please contact your primary healthcare provider for medical advice. CBE does not give medical advice.

Results stated are based on specific user results and may not be the same for everyone.

Review Guarantee & Medical Disclaimer Policy HERE 

Review Shipping Policy HERE 

Review Refund Policy HERE

Review Warranties HERE